Behringer NR300 Noise Reducer, (Used)

The Behringer NR300 Noise Reducer is a compact noise reduction pedal designed to help reduce unwanted hum, hiss and background noise from guitar, bass and pedalboard setups. It is especially useful for players using single-coil pickups, high-gain drive pedals, fuzz pedals or noisy signal chains where unwanted noise becomes more obvious between notes and during pauses.

This used NR300 is a practical, affordable option for players who want a straightforward noise reducer with simple controls, Reduction and Mute modes, and a send/return loop for placing noisy pedals inside the noise reduction circuit. Behringer describes the NR300 as a noise reduction effects pedal designed to preserve the original attack and envelope while reducing unwanted noise.

---

At A Glance

---

Condition Overview

Used Condition – This pedal is pre-owned.

A specific Fair Deal Music condition grade has not been supplied for this item. The listing should be updated with the correct grade once the pedal has been physically assessed.

---

What’s Included?

✔ Behringer NR300 Noise Reducer Pedal

---

Condition Notes

No specific cosmetic wear, faults or modifications have been supplied for this used pedal. Add any visible marks, scratches, Velcro residue, label wear or operational notes after inspection.

---

Fair Deal Inspection & Assessment

Before leaving Fair Deal Music, this used pedal will be checked to make sure it is ready for its next owner. Our assessment includes:

• Input checked
• Output checked
• Send and return loop checked
• Footswitch tested
• Threshold control tested
• Decay control tested
• Mode switch tested
• Bypass checked
• Power operation checked
• General functionality assessed

---

Service / Testing Work

This Behringer NR300 will be tested as part of our used pedal inspection process. The footswitch, control response, noise reduction operation, send/return connections and power operation are checked so the pedal can be used with confidence in a practice setup, recording rig or pedalboard.

---

Why Choose The Behringer NR300 Noise Reducer?

Helps Control Hum, Hiss And Signal Noise

Noise can become a problem when using high-gain distortion, stacked overdrives, compressors, fuzz pedals or single-coil pickups. The NR300 is designed to reduce unwanted background noise while keeping your playing response intact. Behringer specifically positions it as a pedal for reducing unwanted noise and hum without altering the core feel of your playing.

Reduction And Mute Modes

The NR300 offers two operating modes. Reduction mode reduces quieter noise and hum when your signal drops below the selected threshold, while Mute mode works as a silent on/off switch for muting the whole input signal during pauses or between songs.

This makes it useful both as a normal noise reducer and as a practical mute tool for live or rehearsal use.

Threshold And Decay Controls

The Threshold control sets the level at which the pedal begins reducing the signal, while the Decay control determines how quickly the reduction releases when the input rises above the threshold again.

That gives you useful control over how tight or natural the noise reduction feels. Set carefully, it can clean up noise without making sustained notes feel too abruptly cut off.

Send And Return Loop

The NR300 includes a send and return loop, allowing you to place noisy pedals inside the reduction circuit. The manual describes the send connection as a way to connect to the input of an external effects unit, while the return feeds the external effect signal back into the pedal.

This is particularly helpful if the main source of noise is a high-gain drive pedal, fuzz pedal or preamp-style effect.

Affordable Pedalboard Utility

Noise reducers are not always the most exciting pedals, but they can make a rig feel much more controlled. The NR300 is a good-value option for players who want to tidy up unwanted noise without spending boutique pedal money.

---

Comparison Against Popular Alternatives

Behringer NR300 vs Boss NS-2 Noise Suppressor

The Boss NS-2 is the more established professional option, with a tougher enclosure and long-standing pedalboard reputation. The Behringer NR300 is the better-value choice for players who want a similar style of noise reduction layout at a lower cost.

Choose the NR300 if affordability is the main priority. Choose the NS-2 if you want a more rugged touring pedal.

Behringer NR300 vs TC Electronic Sentry Noise Gate

The TC Electronic Sentry offers more advanced control and TonePrint editing. The NR300 is simpler and more immediate, making it better for players who want a quick plug-in-and-adjust solution.

Choose the NR300 for simple, affordable noise reduction. Choose the Sentry if you want deeper editing and more precise gating.

Behringer NR300 vs ISP Decimator

The ISP Decimator is known for strong, natural-feeling noise reduction and a more premium build. The NR300 is more budget-friendly and includes a loop-style layout, making it a practical choice for basic noise control.

Choose the NR300 for value. Choose an ISP Decimator if you want a more professional-grade dedicated noise reduction pedal.

Behringer NR300 vs Using No Noise Gate

Without a noise reducer, high-gain rigs can produce hiss, hum and unwanted noise during pauses. The NR300 helps clean up those gaps, which can make rehearsals, recordings and live performances sound tighter.

---

Who Is It For?

Beginner Players

A useful first noise reducer for players starting to use distortion, overdrive, fuzz or single-coil guitars and noticing unwanted background noise.

Intermediate Players

Ideal for players building a pedalboard who want more control over noise from gain pedals, compressors or amp drive.

Professional Players

A practical backup or budget utility pedal for controlled setups, rehearsal boards or home recording rigs. Players needing a heavy-duty touring unit may prefer a more rugged metal-enclosure alternative.

Suitable Genres And Uses

• Rock
• Metal
• Punk
• Blues rock
• Indie
• Worship
• Shoegaze
• High-gain rhythm playing
• Lead guitar
• Bass pedalboards
• Home recording
• Rehearsal setups
• Single-coil guitar rigs

---

Why Choose A Noise Reducer Pedal?

A noise reducer pedal helps control unwanted sound when you are not actively playing. This is especially useful when using higher gain settings, stacked pedals or guitars that naturally pick up hum from lights, electrical interference or certain room environments.

Used correctly, a noise reducer can make stops cleaner, reduce hiss between phrases and help your rig sound more professional. It is not a replacement for good cables, proper power supplies or well-maintained equipment, but it is a very useful tool when noise is part of the signal chain.

Looking for advice on choosing the right noise reducer pedal? Our experienced team of musicians can help by phone, online or in-store.

---

Story & Context

The Behringer NR300 is part of Behringer’s compact effects pedal range, designed to give players affordable access to practical pedalboard tools. Unlike a creative effect such as delay or chorus, a noise reducer is a problem-solving pedal. Its job is to make the rest of the rig behave better by reducing unwanted hum and hiss.

That makes the NR300 a sensible choice for players who use noisy gain pedals, rehearse at higher volumes, record at home or need a cleaner signal between songs and sections.

---

Technical Specifications

---

Power Requirements

The Behringer NR300 can be powered by a 9V battery or a compatible 9V DC power supply. Behringer states that the pedal can be powered with a 9V battery or its PSU-SB DC power supply.

Use a suitable regulated 9V DC pedal power supply for normal pedalboard use.

---

Fair Deal Music Verdict

★★★★★ 5/5

The Behringer NR300 Noise Reducer is a strong used choice for players who want an affordable way to clean up hum, hiss and high-gain pedalboard noise. Its standout feature is the send/return loop, which makes it more flexible than a basic single-input noise gate, while the Reduction and Mute modes keep it practical for both playing and silent switching. For beginner and intermediate players building a cleaner-sounding rig on a sensible budget, this is a very useful pedalboard tool.

---

Why Buy From Fair Deal Music?

Choosing Fair Deal Music means buying from a passionate team of musicians who genuinely understand the products we sell. Whether you're purchasing your first instrument, upgrading your current setup or searching for something special, we're here to help you make the right choice with friendly advice and expert support.

When you shop with Fair Deal Music, you can buy with confidence thanks to:

Expert advice from knowledgeable musicians
Carefully checked new, used, pre-owned and ex-display equipment
Competitive prices on leading music brands
Secure UK-wide delivery
Flexible finance options available (subject to status)
Friendly support before and after your purchase
A trusted independent UK music retailer with decades of experience

Trade In. Trade Up. Save More.

Thinking about upgrading? Your next piece of gear could cost less than you think.

We're always happy to consider part exchanges and trade-ins on a wide range of musical instruments and equipment. Whether you're looking to upgrade your guitar, keyboard, amplifier, drum kit or studio gear, your existing equipment could help reduce the cost of your next purchase.

Simply get in touch with our team for a no-obligation valuation, and we'll be happy to discuss the options available.

It's an easy way to unlock the value of the gear you no longer use while making your next instrument even more affordable.

---

FAQ

Is the Behringer NR300 good for high-gain guitar?

Yes. The NR300 is designed to reduce unwanted noise and hum, making it useful for high-gain guitar rigs, distortion pedals and noisy pedalboards.

What is the difference between Reduction mode and Mute mode?

Reduction mode reduces quiet noise when the signal drops below the threshold. Mute mode silences the whole input signal, making it useful as a quiet on/off switch during pauses.

Can I use the NR300 with bass?

Yes. The NR300 can be used with bass, especially if your setup includes drive pedals, fuzz, compression or other effects that increase background noise.

Where should the NR300 go in my pedal chain?

It can be placed after noisy gain pedals, or you can use the send/return loop to place those pedals inside the noise reduction circuit. This helps target the pedals that are creating the noise.

Will a noise reducer affect sustain?

Any noise gate or reducer can affect sustain if the threshold is set too aggressively. For a more natural feel, start with a lower threshold and adjust the decay so notes fade smoothly.

Is the NR300 suitable for recording?

Yes. It can help clean up noisy guitar or bass signals before recording, especially when using high gain, single-coil pickups or older pedals.

Does the NR300 need a battery?

It can run from a 9V battery, but a compatible 9V DC pedal power supply is usually more practical for pedalboard use.

Is this a good budget alternative to more expensive noise gates?

Yes. It is a good-value option for players who want basic noise reduction and a send/return loop without paying for a higher-end pedal.